63P3F11 6-52123456789Installing the lower unit1. Set the gear shift to the neutral positionat the lower unit.2. Align the center of the set pin a with themark b on the bottom cowling.3. Install the two dowels 1 into the lowerunit.4. Install the lower unit into the upper case,and then tighten the lower case mountingbolts 2 to the specified torque.5. Install the trim tab 3 to its original posi-tion, and then tighten the bolt 4 to thespecified torque.È X-transom modelShift rod push arm: 90890-06052S63P3270baT R..Lower case mounting bolt 2:47 N·m (4.7 kgf·m, 34.7 ft·lb)Trim tab bolt 4:42 N·m (4.2 kgf·m, 31.0 ft·lb)Drive shaft and lower case (counter rotation model)
