E5-8208063EMU00434ENGINE FAILS TO OPERATEEMU00442Cold Engine Fails to Start1) Place the gear shift lever / remotecontrol lever in the neutral position.2) Open the throttle halfway (on modelswith neutral throttle-limiter, openthrottle as far as it will go).3) Start the engine.4) If the engine still will not start, openand close the throttle two or threetimes to feed additional fuel to theintake manifold by the acceleratorpump of the carburetor.5) Then open the throttle halfway andstart the engine.5) Insert the knotted end of the emer-gency starter rope into the notch inthe flywheel rotor and wind the ropeseveral turns clockwise.6) Pull the rope slowly until resistance isfelt.7) Give a strong pull straight out tocrank and start the engine. Repeat ifnecessary.NOTE:If the engine will not start with this proce-dure, refer to “ENGINE FAILS TO OPER-ATE”.
