EEMU00162TOP COWLING LOCK LEVERTo remove the engine top cowling, turnthe lock lever. Then lift off the cowling.When replacing the cowling, check to besure it fits properly in the rubber seal.Then lock the cowling again by movingthe lever upward.1 Top cowling lock lever301044qEMU00156TILT SUPPORT BARThe tilt support bar 1 keeps the outboardmotor in the tilted up position.403052q2-17EMU00153TILT LOCK MECHANISM(for Manual tilt model)The tilt-lock mechanism is used to pre-vent reverse thrust from the propeller lift-ing the outboard motor when reversing.To lock it, set the tilt-lock lever in the Lockposition.To release it, place the tilt-lock lever in theTilt position.1 Tilt-lock lever402073q403054EMU00155TILT SUPPORT KNOBTo keep the outboard motor in the tilted-up position, push the tilt support knobunder the swivel bracket.
