Yamaha FJR1300-AE Owner's Manual

Also see for FJR1300: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

Instrument and control functions3-83Adjusting the set cruising speedWhile the cruise control system is op-erating, push the “RES+” side of thecruise control setting switch to in-crease the set cruising speed or the“SET–” side to decrease the set speed.TIPPushing the setting switch once willchange the speed in increments of ap-proximately 2.0 km/h (1.2 mi/h). Hold-ing the “RES+” or “SET–” side of thecruise control setting switch down willincrease or decrease the speed contin-uously until the switch is released.You can also manually increase yourtraveling speed using the throttle. Afteryou have accelerated, you can set anew cruising speed by pushing the“SET–” side of the setting switch. If youdo not set a new cruising speed, whenyou return the throttle grip, the vehiclewill decelerate to the previously setcruising speed.Deactivating the cruise control sys-temPerform one of the following opera-tions to cancel the set cruising speed.The “SET” indicator light will go off. Turn the throttle grip past theclosed position in the decelerationdirection. Apply the front or rear brake. Disengage the clutch.Push the power switch to turn off thecruise control system. The “ ” indica-tor light and the “SET” indicator lightwill go off.TIPTraveling speed decreases as soon asthe cruise control system is deactivat-ed; unless the throttle grip is turned.Using the resume functionPush the “RES+” side of the cruisecontrol setting switch to reactivate thecruise control system. The travelingspeed will return to the previously setcruising speed. The “SET” indicatorlight will come on.WARNINGEWA16351It is dangerous to use the resumefunction when the previously setcruising speed is too high for currentconditions.TIPPushing the power switch while thesystem is operating will turn the systemoff completely and erase the previously1. Closed position2. Cruise control cancel direction2 1