INSTRUMENT AND CONTROL FUNCTIONS3-113 When the key is turned to “ON”,the coolant temperature is auto-matically displayed, even if the airintake temperature was displayedprior to turning the key to “OFF”. When the air intake temperaturedisplay is selected, “A” is displayedfor one second, and then the air in-take temperature is displayed.Self-diagnosis deviceThis model is equipped with a self-diag-nosis device for various electrical cir-cuits.If a problem is detected in any of thosecircuits, the engine trouble warning lightwill come on and the display will indi-cate a two-digit error code.This model is also equipped with a self-diagnosis device for the immobilizersystem.If a problem is detected in the immobi-lizer system circuits, the immobilizersystem indicator light will flash and thedisplay will indicate a two-digit errorcode.TIPIf the display indicates error code 52,this could be caused by transponder in-terference. If this error code appears,try the following.1. Use the code re-registering key tostart the engine.TIPMake sure there are no other immobi-lizer keys close to the main switch, anddo not keep more than one immobilizerkey on the same key ring! Immobilizersystem keys may cause signal interfer-ence, which may prevent the enginefrom starting.2. If the engine starts, turn it off andtry starting the engine with thestandard keys.3. If one or both of the standard keysdo not start the engine, take thevehicle, the code re-registeringkey and both standard keys to aYamaha dealer and have the stan-dard keys re-registered.If the display indicates any error codes,note the code number, and then have aYamaha dealer check the vehicle.NOTICEECA11590If the display indicates an errorcode, the vehicle should be checkedas soon as possible in order to avoidengine damage.1. Error code displayU2D1E3E0.book Page 11 Monday, July 14, 2008 3:08 PMOfrecido por www.electromanuales.com