INSTRUMENT AND CONTROL FUNCTIONS3-223Spring preloadTo increase the spring preload andthereby harden the suspension, turnthe adjusting bolt on each fork leg in di-rection (a). To decrease the spring pre-load and thereby soften thesuspension, turn the adjusting bolt oneach fork leg in direction (b).Align the appropriate groove on the ad-justing mechanism with the top of thefront fork cap bolt.Rebound damping forceThe rebound damping force is adjustedon the right front fork leg only. To in-crease the rebound damping force andthereby harden the rebound damping,turn the adjusting screw in direction (a).To decrease the rebound dampingforce and thereby soften the rebounddamping, turn the adjusting screw in di-rection (b).TIPBe sure to perform this adjustment onthe right front fork leg.1. Spring preload adjusting bolt1. Current setting2. Front fork cap boltSpring preload setting:Minimum (soft):8Standard:5.5Maximum (hard):01. Rebound damping force adjusting screwU2D1E3E0.book Page 22 Monday, July 14, 2008 3:08 PMOfrecido por www.electromanuales.com
