PERIODIC MAINTENANCE AND ADJUSTMENT6-3563. Remove the socket (together withthe bulb) by pulling it out.4. Remove the burnt-out bulb by pull-ing it out.5. Insert a new bulb into the socket.6. Install the socket (together with thebulb) by pushing it in.7. Install the auxiliary light couplerbracket by installing the screws.8. Install the headlight unit by install-ing the bolts.EAU24350Supporting the motorcycleSince this model is not equipped with acenterstand, follow these precautionswhen removing the front and rearwheel or performing other maintenancerequiring the motorcycle to stand up-right. Check that the motorcycle is in astable and level position before startingany maintenance. A strong woodenbox can be placed under the engine foradded stability.To service the front wheel1. Stabilize the rear of the motorcycleby using a motorcycle stand or, ifan additional motorcycle stand isnot available, by placing a jack un-der the frame in front of the rearwheel.2. Raise the front wheel off theground by using a motorcyclestand.To service the rear wheelRaise the rear wheel off the ground byusing a motorcycle stand or, if a motor-cycle stand is not available, by placing1. Screw2. Auxiliary light coupler bracket1. Auxiliary light bulb socket1. Auxiliary light bulbU2D1E3E0.book Page 35 Monday, July 14, 2008 3:08 PMOfrecido por www.electromanuales.com
