Yamaha FZ8-N Owner's Manual

Also see for FZ8-N: Owner's manual Owner's manual

Contents

INSTRUMENT AND CONTROL FUNCTIONS3-93ClockThe clock displays when the key isturned to “ON”. In addition, the clockcan be displayed for 10 seconds bypushing the “SELECT” button when themain switch is in the “OFF”, “LOCK”or “ ” position.To set the clock1. Turn the key to “ON”.2. Push the “SELECT” button and“RESET” button together for atleast two seconds.3. When the hour digits start flashing,push the “RESET” button to set thehours.4. Push the “SELECT” button, andthe minute digits will start flashing.5. Push the “RESET” button to setthe minutes.6. Push the “SELECT” button andthen release it to start the clock.Odometer and tripmeter modesPush the “SELECT” button to switchthe display between the odometermode “ODO” and the tripmeter modes“TRIP A” and “TRIP B” in the followingorder:TRIP A → TRIP B → ODO → TRIP AWhen the fuel amount in the fuel tankdecreases to 3.4 L (0.90 US gal,0.75 Imp.gal), the left segment of thefuel meter will start flashing, and theodometer display will automaticallychange to the fuel reserve tripmetermode “F-TRIP” and start counting thedistance traveled from that point. In thatcase, push the “SELECT” button toswitch the display between the varioustripmeter and odometer modes in thefollowing order:F-TRIP → TRIP A → TRIP B → ODO→ F-TRIPTo reset a tripmeter, select it by push-ing the “SELECT” button, and thenpush the “RESET” button for at leastone second. If you do not reset the fuelreserve tripmeter manually, it will resetitself automatically and the display willreturn to the prior mode after refuelingand traveling 5 km (3 mi).Fuel meter1. Clock11. Odometer/tripmeter/fuel reserve tripmeter11. Fuel meter1U39PE2E0.book Page 9 Thursday, November 8, 2012 9:24 AM