INSTRUMENT AND CONTROL FUNCTIONS3-283With the engine turned off:1. Move the sidestand down.2. Make sure that the engine stop switch is turned on.3. Turn the key on.4. Shift the transmission into the neutral position.5. Push the start switch.Does the engine start?With the engine still running:6. Move the sidestand up.7. Keep the clutch lever pulled.8. Shift the transmission into gear.9. Move the sidestand down.Does the engine stall?After the engine has stalled:10. Move the sidestand up.11. Keep the clutch lever pulled.12. Push the start switch.Does the engine start?The system is OK. The motorcycle can be ridden.YES NOYES NOYES NOThe neutral switch may not be working correctly.The motorcycle should not be ridden untilchecked by a Yamaha dealer.The clutch switch may not be working correctly.The motorcycle should not be ridden untilchecked by a Yamaha dealer.The sidestand switch may not be working correctly.The motorcycle should not be ridden untilchecked by a Yamaha dealer.• The vehicle must be placed on the center-stand during this inspection.• If a malfunction is noted, have a Yamahadealer check the system before riding.WARNINGU3C3E3E0.book Page 28 Thursday, July 10, 2008 2:03 PM
