PERIODIC MAINTENANCE AND ADJUSTMENT6-336EAU23932Replacing a headlight bulbThis model is equipped with quartz bulbheadlights. If a headlight bulb burnsout, replace it as follows.NOTICEECA10650Take care not to damage the follow-ing parts: Headlight bulbDo not touch the glass part ofthe headlight bulb to keep it freefrom oil, otherwise the transpar-ency of the glass, the luminosityof the bulb, and the bulb life willbe adversely affected. Thor-oughly clean off any dirt and fin-gerprints on the headlight bulbusing a cloth moistened with al-cohol or thinner. Headlight lensDo not affix any type of tintedfilm or stickers to the headlightlens.Do not use a headlight bulb of awattage higher than specified.1. Disconnect the headlight coupler,and then remove the bulb cover.2. Unhook the headlight bulb holder,and then remove the burnt-outbulb.3. Place a new headlight bulb into po-sition, and then secure it with thebulb holder.4. Install the headlight bulb cover,and then connect the coupler.5. Have a Yamaha dealer adjust theheadlight beam if necessary.1. Do not touch the glass part of the bulb.1. Headlight coupler2. Headlight bulb cover1. Headlight bulb holderU3C3E3E0.book Page 33 Thursday, July 10, 2008 2:03 PM
