Yamaha HTR-2064 Owner's Manual

Also see for HTR-2064: Service manual

Contents

En 18CONNECTIONSWhen you have finished connecting your speakers,configure this unit so that they output sound normally.Carry out the following steps to configure this unit.STEP 1: Display the setting menuDisplay the Setup menu from which you can configureall settings for this unit, and then display the menu forspeaker settings.STEP 2: Set the speaker status and sizeSet the size and connection status of speakers andsubwoofers, and whether to designate a specific speaker(or subwoofer) for low-frequency sound.STEP 3: Set the distance from the listeningpointSet the distance between the speakers and the listeningpoint so that the sound from each speaker reaches thelistening point at the appropriate timing.STEP 4: Playback a test tonePlayback a test tone to allow you to configure soundvolumes while listening to the actual effect your settingsare having.STEP 5: Adjust the volumeAdjust the volume for each speaker and configure themso that the sound is balanced.STEP 1: Display the setting menu1 Switch this unit on.2 Press hSETUP on the remote control.The Setup menu that allows you to configure allparameters on this unit appears. J13 Check that “Speaker Setup” appears andpress iENTER.This completes step 1.STEP 2: Set the speaker status andsizeThe settings in step 2 are not necessary with thefollowing speaker configuration:– Subwoofer: connected– Front speaker: woofer diameter is 16 cm or larger– Center/surround speakers: woofer diameter is 16 cm orsmaller4 Check that “Config” appears and pressiENTER.Setting up speaker parametersSETUPENTERRECEIVERSCENEOPTIONRETURNVOLUMETRANSMITSLEEPBDDVD TV CD RADIOMUTE1 2 31 2 34 5 6HDMIAUDIOTUNERSOUNDINFOTUNERMEMORYPRESET TUNINGSUR. DECODESTRAIGHTENHANCERSTEREOMUSICMOVIEihhSETUPiENTERSWCLSL SRRSpeakerSetupSETUP VOL.SWCLSL SRRConfigSP SET VOL.SWCLSL SRRSubwoofer;;YesCONFIG VOL.Continues to thenext pageJ 1 : See the section “Setting various functions (Setup menu)” fordetails on the Setup menu (☞p. 33).