En 37SETUPSetting various functions (Setup menu)Setting the audio output function of thisunitSound Setup submenu■ Synchronizing audio/video outputAdjusts the delay between audio and video output (Lipsyncfunction).HDMI AutoWhen connecting to a TV via HDMI, automatically adjusts outputtiming if the TV supports an automatic lipsync function.AutoFine-adjust the audio output timing by entering the correction timeprovided when “HDMI Auto” is set to “On.”ManualManually adjusts the correction time. Select this when the TV doesnot support the automatic lipsync function or “HDMI Auto” is setto “Off.”■ Auto-adjusting the sound level to makeeven low volumes more audibleAdjusts the dynamic range in conjunction with the volume level(from minimum to maximum). When you play audio at night or atlow volumes, it is a good idea to set parameter to “On.” J1When the auto function is enabled, it adjusts the dynamic range asfollows.Lipsync Adjusts the delay between video and audio output.Adaptive DRC Auto-adjusting the sound level to make even lowvolumes more audible.D.Range Selects the dynamic range adjustment method fordigital audio playback.Max Volume Sets the maximum volume for this receiver.Init.Volume Sets the initial volume for when this receiver is turnedon.SWCLSL SRRSoundSetupSETUP VOL.LipsyncOff Select this when the connected TV does not supportthe automatic lipsync function or you do not wish touse the automatic lipsync function. Set the correctiontime in “Manual.”On (Default) Select this when the TV supports the automaticlipsync function. Fine-adjust the correction time in“Auto.”Adjustable range 0 ms to 240 msAdjustmentincrements1 msAdjustable range 0 ms to 240 msAdjustmentincrements1 msDefault setting 0 msAdaptive DRCOff (Default) Does not adjust the dynamic range automatically.On Adjusts the dynamic range automatically.OnOffOnOffInput Level Input LevelVolume: low Volume: highOutput LevelOutput LevelJ 1 : The Adaptive DRC setting is also effective when you use headphones.