Yamaha MT-10 Owner's Manual

Also see for MT 10: Owner's manual Owner's manual Owner's manual

Contents

For your safety – pre-operation checks6-2123456789101112Rear brake• Check operation.• If soft or spongy, have Yamaha dealer bleed hydraulic system.• Check brake pads for wear.• Replace if necessary.• Check fluid level in reservoir.• If necessary, add specified brake fluid to specified level.• Check hydraulic system for leakage.8-22, 8-23Clutch• Check operation.• Lubricate cable if necessary.• Check lever free play.• Adjust if necessary.8-21Throttle grip• Make sure that operation is smooth.• Check throttle grip free play.• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cableand grip housing.8-17, 8-27Control cables • Make sure that operation is smooth.• Lubricate if necessary. 8-26Drive chain• Check chain slack.• Adjust if necessary.• Check chain condition.• Lubricate if necessary.8-24, 8-26Wheels and tires• Check for damage.• Check tire condition and tread depth.• Check air pressure.• Correct if necessary.8-18, 8-20Brake and shift pedals • Make sure that operation is smooth.• Lubricate pedal pivoting points if necessary. 8-27Brake and clutch levers • Make sure that operation is smooth.• Lubricate lever pivoting points if necessary. 8-28Sidestand • Make sure that operation is smooth.• Lubricate pivot if necessary. 8-28Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened.• Tighten if necessary. —ITEM CHECKS PAGE