Yamaha MT125 Owner's Manual

Also see for MT-125: Owner's manual Owner's manual

Contents

INSTRUMENT AND CONTROL FUNCTIONS3-53ton to switch between kilometersand miles and then press the “SE-LECT” button for two seconds toconfirm the setting.TachometerThe tachometer allows the rider tomonitor the engine speed and keep itwithin the ideal power range.When the key is turned to “ON”, the ta-chometer will sweep across the r/minrange and then return to zero r/min inorder to test the electrical circuit.NOTICEECAM1150Do not operate the engine in the ta-chometer high-rpm zone.High-rpm zone: 10000 r/min andaboveClockThe clock displays when the key isturned to “ON”.To set the clock1. Turn the key to “ON”.2. Push the “SELECT” button for atleast two seconds.3. When the hour digits start flash-ing, use the “RESET” button to setthe hours.4. Push the “SELECT” button , andthe minute digits will start flashing.5. Use the “RESET” button to set theminutes.6. Push the “SELECT” button andthen release it to start the clock.TIPWhen setting the hours and minutes,push the “RESET” button briefly to in-crease the increment value one by one,or push and hold the button to increasethe increment value continuously.Fuel meterThe fuel meter indicates the amount offuel in the fuel tank. The display seg-ments of the fuel meter disappear to-wards “E” (Empty) as the fuel level1. Tachometer2. High-rpm zoneZAUM1147km/hx1000r/min121. ClockZAUM11481/2ODO TRIP111. Fuel meter2. Fuel level warning light “ ”3. Fuel reserve tripmeter4. Information displayZAUM1149km/hLoHi1/2FTRIPx1000r/min2134