Yamaha MT125 Owner's Manual

Also see for MT-125: Owner's manual Owner's manual

Contents

INSTRUMENT AND CONTROL FUNCTIONS3-123RightEAU12351Pass switch “ ”Press this switch to flash the headlight.EAU12401Dimmer switch “ / ”Set this switch to “ ” for the highbeam and to “ ” for the low beam.EAU12461Turn signal switch “ / ”To signal a right-hand turn, push thisswitch to “ ”. To signal a left-handturn, push this switch to “ ”. Whenreleased, the switch returns to the cen-ter position. To cancel the turn signallights, push the switch in after it has re-turned to the center position.EAU12501Horn switch “ ”Press this switch to sound the horn.EAU12661Engine stop switch “ / ”Set this switch to “ ” before startingthe engine. Set this switch to “ ” tostop the engine in case of an emergen-cy, such as when the vehicle overturnsor when the throttle cable is stuck.EAU12713Start switch “ ”Push this switch to crank the enginewith the starter. See page 5-1 for start-ing instructions prior to starting the en-gine.EAU44712The engine trouble warning light andABS warning light (ABS model only)may come on when the key is turned to“ON” and the start switch is pushed,but this does not indicate a malfunc-tion.EAUM3451Info switch “INFO”This switch is used to perform selec-tions in the function display of themulti-function meter unit and to acti-vate or deactive the high-rpm warninglight. (See page 3-4 for information onthe multi-function meter unit and page3-3 for information on the tachometerhigh-rpm warning light.)1. Engine stop switch “ / ”2. Start switch “ ”3. “INFO” switchZAUM11631 32INFO