13 EnConnectionsPREPARATION EnglishYou can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS),on the unit.Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable).y• If you are using a router that supports DHCP, you do not need toconfigure any network settings for the unit, as the networkparameters (such as the IP address) will be assignedautomatically to it. You only need to configure the networksettings if your router does not support DHCP or if you want toconfigure the network parameters manually (p.36).• You can check whether the network parameters (such as IPaddress) are properly assigned to the unit in “Information”(p.36) in the “Setup” menu.• Some security software installed on your PC or the firewallsettings of network devices (such as a router) may block theaccess of the unit to the network devices or the Internet. In thesecases, configure the security software or firewall settingsappropriately.• Each server must be connected to the same subnet as the unit.• To use the service via the Internet, broadband connection isstrongly recommended.After all the connections are complete, plug in the powercable.Connecting to a networkABPB1 2 3RECSPEAKERSCD LINEANTENNAFM AM75 ΩDC OUT5V 0.5ANETWORKDIGITALCOAXIALOPTICALLANWANNetwork Attached Storage(NAS)InternetModemRouterNetwork cablePCThe unit (rear)Mobile device(such as iPhone)NotesConnecting power cableTo an AC wall outlet
