38 EnConfigure the system settings of the unit while viewing the front display.1 Turn off the unit.2 While holding down RETURN on the frontpanel, press A (power).3 Rotate SELECT/ENTER to select an item.4 Press SELECT/ENTER to select a setting.5 Press A (power) to set the unit to turn off andturn it on again.The new settings take effect.Restores the default settings for the unit.ChoicesNew firmware that provides additional features or productimprovements will be released as needed. If the unit isconnected to the Internet, you can download the firmwarevia the network. For details, refer to the informationsupplied with updates.■ Firmware update procedureDo not perform this procedure unless firmware update isnecessary. Also, make sure you read the informationsupplied with updates before updating the firmware.1 When the “NETWORK” displayed on the frontdisplay, press RETURN to start firmwareupdate.yIf the unit detects newer firmware over the network,“NewFwAvailable” appears as the “Information” menu item in“Network Setup”. In this case, you can also update the unit’sfirmware by following the procedure in “Updating the unit’sfirmware via the network” (p.39).Check the version of firmware currently installed on theunit.y• You can also check the firmware version in “Update” (p.37) inthe “Setup” menu.• It may take a while until the firmware version is displayed.Configuring the system settings (ADVANCED SETUP menu)ADVANCED SETUP menu itemsItem Function PageINIT Restores the default settings. 38UPDATE Updates the firmware. 38VERSION Checks the version of firmwarecurrently installed on the unit. 38Restoring the default settings (INIT)ALL Restores the default settings for the unit.CANCEL Does not perform an initialization.STANDBY/ONVOLUMERETURNPUSH - ENTERTUNINGPRESETFM/AMMEMORYBASS TREBLE INPUTFM MODEDISPLAYSELECTPHONES SPEAKERSA BA (power)SELECT/ENTERRETURNINIT••••••CANCELUpdating the firmware (UPDATE)Checking the firmware version(VERSION)UPDATE•••NETWORKVERSION••••xx.xx