Yamaha R-N301 Owner's Manual

Also see for R-N301: Owner's manual Owner's manual Owner's manual

Contents

36 EnConfiguring various functions (Setup menu)Configures the network settings.■ InformationDisplays the network information on the unit.■ IP AddressConfigures the network parameters (such as IP address).DHCPSelect whether to use a DHCP server.Manual network settings1 Set “DHCP” to “Off”.2 Use the cursor keys (B / C) to select aparameter type.3 Use the cursor keys (D / E) to select the editposition.(Example: IP address setting)Use the cursor keys (D / E) to switch betweensegments (Address1, Address2...) of the address.4 Use the Cursor keys (B / C) to change avalue.5 To exit from the menu, press SETUP.■ MAC FilterSets the MAC address filter to limit access to the unit fromother network devices.FilterEnables/disables the MAC address filter.MAC address filter settings1 Set “Filter” to “On”.2 Use the cursor keys (B / C) to select an MACaddress number (01 to 10).3 Use the cursor keys (D / E) to move the editposition and the cursor keys (B / C) to selecta value.4 To exit from the menu, press SETUP.yWhen using “AirPlay” (p.26) and “DMC Control” (p.36), youcannot limit access from network devices regardless of the MACaddress filter.■ DMC ControlSelects whether to allow DLNA-compatible Digital MediaController (DMC) to control playback.yA Digital Media Controller (DMC) is a device that can controlother network devices through the network. When this function isenabled, you can control playback of the unit from DMCs (suchas Windows Media Player 12) on the same network.■ Net StandbySelects whether the unit can be turned on from othernetwork devices (network standby).Network SetupNewFwAvailable Appears if an update for this unit’s firmware isavailable (p.39).Status The connection status of the NETWORK jackMAC MAC addressIP IP addressSubnet Subnet maskGateway The IP address of the default gatewayDNS(P) The IP address of the primary DNS serverDNS(S) The IP address of the secondary DNS servervTunerID The ID of the Internet radio (vTuner)OffDoes not use a DHCP server. Configure thenetwork parameters manually. For details, see“Manual network settings”.On (default) Uses a DHCP server to automatically obtain theunit’s network parameters (such as IP address).Address Specifies an IP address.SubnetMask Specifies a subnet mask.DefaultGateway Specifies the IP address of the default gateway.DNSServer(P)Specifies the IP address of the primary DNSserver.DNSServer(S)Specifies the IP address of the secondary DNSserver.SP A¡ Address1••192›NetworkOff (default) Disables the MAC address filter.OnEnables the MAC address filter. In “MACAddress 01–10”, specify the MAC addresses ofthe network devices that will be permitted accessto the unit.Disable Does not allow DMCs to control playback.Enable(default) Allows DMCs to control playback.Off (default) Disables the network standby function.OnEnables the network standby function. (The unitconsumes more power than when “Off” isselected.)