Yamaha R-N301 Owner's Manual

Also see for R-N301: Owner's manual Owner's manual Owner's manual

Contents

37 EnConfiguring various functions (Setup menu)EnglishADVANCEDOPERATION■ Network NameEdits the network name (the unit’s name on the network)displayed on other network devices.1 Select “Network Name”.2 Press ENTER to enter the name edit display.3 Use the cursor keys (D / E) to move the editposition and the cursor keys (B / C) to selecta character.4 To confirm the new name, press ENTER.5 To exit from the menu, press SETUP.■ UpdateUpdates the firmware via the network.Adjusting the high and low frequency response.Adjusting the sound output balance of the left and rightspeakers to compensate for sound imbalance caused byspeaker locations or listening room conditions.Control rangeL+10 to R+10yFor details, refer to the “Adjusting the speaker balance” (p.16).Sets the maximum volume to prevent excessive loudness.Setting range1 to 99 (1 step increments), MaxDefaultMaxSets the initial volume when the receiver is turned on.Setting rangeOff, Mute, 1 to 99 (1 step increments), MaxDefaultOffConfigures the DC OUT jack setting.PowerModeSelects how to supply power to the Yamaha AV accessoryconnected to the DC OUT jack.PerformUpdateStarts the process to update the unit’s firmware.For details, see “Updating the unit’s firmware viathe network” (p.39).Version Displays the version of the firmware installed onthe unit.ID Displays the system ID number.SP A¡ Network NameNetworkSP AR-N301 XXXXXNetworkNetwork nameSP AR-N301 XXXXX›NetworkTone ControlBassWhen you feel there is not enough bass (lowfrequency sound).Control range: –10 to +10 (20 Hz)TrebleWhen you feel there is not enough treble (highfrequency sound).Control range: –10 to +10 (20 kHz)BalanceMax VolumeInitial VolumeDC OUTCon(default)Supplies power through the DC OUT jackcontinuously regardless of the power state (on/standby) of the unit.Sync Supplies power through the DC OUT jack onlywhen the unit is turned on.