Yamaha R-V905 Owner's Manual

Also see for R-V905: Service manual Service manual

24SPEAKER BALANCE ADJUSTMENTThis procedure lets you adjust the sound output level balance between the main, center and rear speakers using the built-in testtone generator. When this adjustment is performed, the sound output level heard at the listening position will be the same fromeach speaker. This is important for the best performance of the digital sound field processor, the Dolby Digital decoder and theDolby Pro Logic Surround decoder.The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.After completing the adjustment of the output level for each speaker, use VOLUME ( ) on the remote control transmit-ter at your listening position to check if the adjustments are satisfactory.Set the SELECTOR DIAL to the AMP/TUN or DSP positionon the remote control transmitter.or1 Set VOLUME to the “∞” position.Front panel2 Turn the power on.Front panel Remote controlor3 Select the main speakers to be used.Front panel* If you use two main speaker systems, press both A and B.285,962 14,743