Yamaha R-V905 Owner's Manual

Also see for R-V905: Service manual Service manual

288 If desired, adjust BASS, TREBLE, BALANCE, etc.(see below) and use the digital sound field processor.(see page 37.)Selecting the SPEAKER systemBecause one or two speaker systems (as main speakers) canbe connected to this unit, SPEAKERS allow you to selectspeaker system A or B, or both at once.Adjusting the BALANCE controlAdjust the balance of the output volume from the left and rightspeakers to compensate for sound imbalances caused byspeaker location or listening room conditions.NoteThis control is effective only for the sound from the mainspeakers.Adjusting the BASS and TREBLE controlsBASS: Turn this clockwise to increase (or counter-clockwiseto decrease) the low frequency response.TREBLE : Turn this clockwise to increase (or counter-clockwiseto decrease) the high frequency response.NoteThese controls are effective only for the sound from the mainspeakers.4 For the DVD/LD or TV/DBS source, the current inputmode is also shown.* To change the input mode for the DVD/LD or TV/DBSsource, press INPUT MODE (or the button that youhave pressed to select the input source in step 3 onthe remote control transmitter) once or more until thedesired input mode (AUTO or ANALOG) is shown onthe display. (See page 29 for details on switching theinput mode.)Front panel Remote controlorInput mode5 Select the main speakers to be used.Front panel* If you use two main speaker systems, press both A and B.6 Play the source. (For detailed information on tuning,see page 31.)7 Adjust the volume to the desired output level.Front panel Remote controlor