Yamaha R-V905 Owner's Manual

Also see for R-V905: Service manual Service manual

36SETTING THE SLEEP TIMERIf you use the SLEEP timer of this unit, you can make this unit automatically switch to the standby mode. When you are going tosleep while enjoying a broadcast or other desired input source, this timer function is useful. The SLEEP timer can be controlledonly with the remote control transmitter.Notes• To set the SLEEP timer for this unit, set the SELECTOR DIAL to a position other than the TV postition. To set the SLEEP timerfor your TV, set the SELECTOR DIAL to the TV position.• The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rearpanel of this unit.To set the SLEEP time1 Press SLEEP once or more to select the desiredSLEEP time.Remote controlIndicates the SLEEP time.Flashes.Whenever SLEEP is pressed, the SLEEP time will changeas follows.(Minutes)120 90 60 30The SLEEP timer is off (SLEEP OFF).(The state before SLEEP ispressed.)After a while, the “SLEEP” indicator lights up and the displayreturns to the indication before the SLEEP timer was set.2 The unit will be switched to the standby mode automati-cally at the selected SLEEP time.To cancel the selected SLEEP timeRemote controlPress SLEEP once or more so that “SLEEP OFF” appears onthe display. (It will soon disappear and the “SLEEP” indicatorwill go off from the display.)NoteThe SLEEP timer setting can also be canceled by tuning thisunit into the standby mode with STANDBY/ON on the frontpanel (or STANDBY on the remote control transmitter) ordisconnecting the power plug of this unit from the AC outlet.1