Yamaha R-V905 Owner's Manual

Also see for R-V905: Service manual Service manual

9EnglishCONTROLS AND THEIR FUNCTIONSFRONT PANEL1 STANDBY/ONPress this switch to turn the power of this unit on. Press itagain to turn this unit into the standby mode.Standby modeIn this state, this unit consumes a very small quantity ofpower to receive infrared-signals from the remote controltransmitter.2 Remote control sensorReceives signals from the remote control transmitter.3 DisplayShows various information. (For details, refer to page 11.)4 MEMORY (MAN’L/AUTO FM)Press this button to store the broadcasting stations.When this button is pressed and held for more than threeseconds, the automatic preset tuning begins.5 EDITThis button is used to exchange the places of two presetstations with each other.6 TUNING MODE (AUTO/MAN’L MONO)Press this button to switch the tuning mode to automatic ormanual. To select the automatic tuning mode, press this buttonso that the “AUTO TUNING” indicator lights up on the display.To select the manual tuning mode, press this button so that the“AUTO TUNING” indicator goes off.7 FM/AMPress this button to switch the reception band to FM or AM.8 TUNING UP/DOWNThis button is used for tuning. Press the UP side to tune in tohigher frequencies, and press the DOWN side to tune in tolower frequencies.9 TAPE/MD MON / EXT. DECODERPress this button to play a tape or an MD. The “TAPE/MDMON” indicator lights up on the display.When you press the button next, the “TAPE/MD MON” indicatorgoes off and “EXT. DECDR” appears on the display and youcan play the signal connected to the EXTERNAL DECODERINPUT terminals.0 INPUTTurn this selector to select the program source (VCR, VIDEOAUX, TV/DBS, DVD/LD, CD, TUNER, PHONO) to listen to orwatch.The name of the selected program source appears on thedisplay.