E- 4Connecting YourSpeakersAlways turn off your amplifier or receiverbefore making any connections.■ Preparing Your Speaker CablesCarefully remove 10 mm (3/8 ”) of insulationfrom both ends of your speaker cables and twistthe bare wires tightly, as shown.■ Hookup■ Using a Banana Plug1. Remove the speaker terminal cover bygently pulling it toward you.2. Tighten the terminal knob.3. Simply insert the banana plug into theterminal.Good No Good10 mm(3/8 ”)SPEAKERSABLR++ – –+–LoosenTightenAmplifier orreceiverNotes:• Make sure that the bare wires are not touching eachother as this could damage the speaker andamplifier.• Connect one speaker to the left terminals of youramplifier, and another speaker to the rightterminals, making sure not to reverse the polarity(+, –). If one speaker is connected with reversedpolarity, the sound will be unnatural and lack bass.132Banana Plug
