Yamaha RX-V367 Owenrs Manual
Also see for RX-V367: Owner's manualService manualDiagramOwner's manualQuick reference guide
                                                         | |
Contents
|
En 11CONNECTIONSConnecting speakers■ Connecting front speakers1 Remove approximately 10mm of insulation from theends of the speaker cables, and twist the bare wiresof the cables together firmly so that they will notcause short circuits.2 Loosen the speaker terminals.3 Insert the bare wire of the speaker cable into the gapon the side of the terminal.4 Tighten the terminal.■ Connecting center speakers / surroundspeakers1 Press the tab on the speaker terminal down.2 Insert the speaker cable end into the terminal.3 Lift the tab to fix the speaker cable in place.■ Connecting the subwoofer1 Connect the subwoofer input jack to theSUBWOOFER jack on this unit with an audio pincable.2 Set the subwoofer volume as follows.Volume: Set to approximately half volume (or slightly less thanhalf).Crossover frequency (if available): Set to maximum.Connecting the banana plug (Except U.K., Europe,Asia and Korea models)Tighten the knob, and then insert the banana plug into the end ofthe terminal.FRONTKERS223144FRONTKERSBanana plugCENTERSURROUNDSPEAKE223311VOLUMEMIN MAXCROSSOVER/HIGH CUTMIN MAXSubwoofer examples |
Related manuals for Yamaha RX-V367
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine