8-5ESU03761Tool kitThe owner’s tool kit has the tools which are sufficient formost periodic maintenance and minor repairs. A torquewrench is also necessary to properly tighten nuts andbolts.1 Tool kitCAUTION:@Before starting the engine, make sure that the toolkit is properly seated in its holder and is securelyfastened.@NOTE:@If you do not have a torque wrench available during aservice operation requiring one, take your snowmobile toa Yamaha dealer to check the torque settings and adjustthem if necessary.@ESU04502Removing and installing the shroud and coversShroudTo remove the shroudTurn the fasteners counterclockwise, slowly raise theshroud, and then unhook the shroud from the shroudstay.1 Fastener2 ShroudTo install the shroudHook the end of the shroud onto the shroud stay, slowlylower it to its original position, and then turn the fastenersclockwise.1 Shroud stayE_8gt.book Page 5 Tuesday, March 28, 2006 5:37 PM
