8-32ESU04560Replacing a headlight bulb1. Remove the top cover. (See pages 8-5–8-7 forremoval procedures.)2. Remove the screws, and then remove the headlightaccess panel.3. Disconnect the headlight coupler.4. Remove the bulb holder cover.5. Unhook the bulb holder by pushing it in, then clock-wise.1 Screw2 Headlight access panel3 Bulb holder cover4 Bulb holder6. Remove the bulb.WARNING@Keep flammable products and your hands away fromthe hot bulb until it has cooled down.@7. Install the new bulb, and then hook the bulb holderonto the headlight unit.8. Install the bulb holder cover, and then connect theheadlight coupler.9. Install the headlight access panel and the top cover.CAUTION:@Keep oil and your hands away from the glass part ofthe bulb or its life and illumination will be affected.If the glass is oil stained, thoroughly clean it with acloth moistened with alcohol or lacquer thinner.@Bulb type: 12 V, 60/55 WE_8gt.book Page 32 Tuesday, March 28, 2006 5:37 PM
