Yamaha SR400 2014 Service Manual

PERIODIC MAINTENANCE3-23▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲7. Install:• Oil drain bolt gasket• Oil drain bolt (oil tank side) “1”• Oil drain bolt gasket• Oil drain bolt (crankcase side) “2”8. Fill:• Oil tank(with the specified amount of the recom-mended engine oil)9. Install:• Engine oil level gauge10.Start the engine, warm it up for several min-utes, and then turn it off. Before checking theengine oil level, wait a few minutes until the oilhas settled.11.Check:• Engine(for engine oil leaks)12.Check:• Engine oil levelRefer to “CHECKING THE ENGINE OILLEVEL” on page 3-21.13.Check:• Engine oil pressure▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Slightly loosen the oil check bolt “1”.NOTICEECA2RD1002Engine start-up with the oil check bolt re-moved will cause an oil spout. Check withthe oil check bolt loosened without fail.b. Start the engine and check to see if oil seepsout while idling the engine for about one min-ute.NOTICEECA2RD1003Any inspection must be conducted at engineidling speed. Do not rev up the engine.c. If no oil seeps out, check the engine oil pas-sages, the oil filter element and the oil pumpfor damage or leakage.Oil drain bolt16 Nm (1.6 m·kgf, 12 ft·lbf)Oil drain bolt30 Nm (3.0 m·kgf, 22 ft·lbf)23NewT R..1NewT R..2Engine oil quantityQuantity (disassembled)2.40 L (2.54 US qt, 2.11 Imp.qt)Without oil filter element replace-ment2.00 L (2.11 US qt, 1.76 Imp.qt)With oil filter element replace-ment2.10 L (2.22 US qt, 1.85 Imp.qt)1