BASIC SERVICE INFORMATION1-7EAS30380BASIC SERVICE INFORMATIONEAS30390QUICK FASTENERSRivet type1. Remove:• Quick fastenerTIPTo remove the quick fastener, push its pin with ascrewdriver, then pull the fastener out.2. Install:• Quick fastenerTIPTo install the quick fastener, push its pin so thatit protrudes from the fastener head, then insertthe fastener into the part to be secured and pushthe pin “a” in with a screwdriver. Make sure thatthe pin is flush with the fastener’s head.Screw type1. Remove:• Quick fastenerTIPTo remove the quick fastener, loosen the screwwith a screwdriver, then pull the fastener out.2. Install:• Quick fastenerTIPTo install the quick fastener, insert the fastenerinto the part to be secured and tighten the screw“a”.EAS30401ELECTRICAL SYSTEMElectrical parts handlingNOTICEECA16600Never disconnect a battery lead while the en-gine is running; otherwise, the electricalcomponents could be damaged.NOTICEECA16750When disconnecting the battery leads from