Yamaha YZ250FM 2021 Owner's Service Manual

HANDLEBAR4-386. Install:• Handlebar grip “1”a. Slightly coat the handlebar left end with arubber adhesive.b. Install the handlebar grip on the handlebarby pressing the grip from the left side.c. Wipe off any excess adhesive with a cleancloth.TIPInstall the handlebar grip to the handlebar sothat the line “a” between the two arrow marksfaces straight upward.7. Install:• Clutch cable “1”TIPBefore installation, apply the lithium-soap-basedgrease to the clutch cable end.8. Adjust:• Clutch lever free playRefer to “ADJUSTING THE CLUTCH LEVERFREE PLAY” on page 3-15.9. Install:• Right grip “1”• Collar “2”Apply adhesive to the tube guide “3”.TIP• Before applying the adhesive, wipe off greaseor oil on the tube guide surface “a” with a lac-quer thinner.• Install the grip to the tube guide so that the gripmatch mark “b” and tube guide slot “c” form theangle as shown.10.Install:• Rubber cover “1”• Throttle grip “2”TIPApply the lithium-soap-based grease on thethrottle grip sliding surface.11.Install:• Throttle cable “1”TIPSlightly coat the end of throttle cable and insideof throttle grip with lithium-soap-based grease.Then, mount the throttle grip onto the handlebar.Clutch lever free play7.0–12.0 mm (0.28–0.47 in)1aa1641bc36412