Yealink SIP-T26P User Manual
Also see for T26P: Configuration guidesQuick reference guideRegistering and usingInstructionsBasic guide
                                                                                                                                | |
Contents
| 
Customizing Your Phone39You can upload your custom logo which will be shown on the idle screen.To upload custom logo via web user interface:1. Click on Phone->Features->General Information>>.2. Select Custom Logo from the pull-down list of Use Logo.3. Click Browse to select the logo file from your local system.4. Click Upload to upload the file.5. Click Confirm to accept the change.The custom logo will be shown on the LCD screen after rebooting the phone.NotePhysically connect your headset, refer to Phone Installation on page 13 andactivate/deactivate it for use.To activate the headset:1. Press on the phone.The HEADSET key LED illuminates solid green when the headset mode is activated.Press the line key or the Answer soft key to answer a call, the call will connect to yourheadset automatically.To deactivate the headset:1. Press again on the phone.The HEADSET key LED turns off when the headset mode is deactivated.You can use headset in priority when enabling the headset prior feature. This feature isespecially useful for permanent or full-time headset users.The logo file format must be “.dob”, contact your system administrator for moreinformation. |
Related manuals for Yealink T26P
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine