Yealink SIP-T42G User Manual

Also see for Yealink SIP-T42G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T42G User Manual Manual pdf 100 page image

User Guide for the SIP-T42G IP Phone905. Press the Conf soft key to place a new call.The conference is placed on hold.6. Enter the number of the new party and then press , , or the Send soft key.7. When the new party answers the call, press the Conf soft key to add the new partyto the conference.8. Repeat steps 5 to 7 until you have added all intended parties.The procedures to set up a network conference call on specific servers may be differentfrom that introduced above. Contact your system administrator for more information.You can use call park to place a call on hold, and then retrieve the call from anotherphone in the system (for example, a phone in another office or conference room). Youcan park an active call by pressing the call park key on the phone. If the call is parkedsuccessfully, the response is either a voice prompt confirming that the call was parked,or a visible prompt on the LCD screen.NoteTo configure a call park key via phone user interface:1. Press Menu->Features->DSS Keys.2. Select the desired DSS key.3. Press or , or the Switch soft key to select Key Event from the Type field.4. Press or , or the Switch soft key to select Call Park from the Key Type field.5. Press or , or the Switch soft key to select the desired line from the AccountID field.6. (Optional.) Enter the string that will appear on the LCD screen in the Label field.7. Enter the call park code in the Value field.8. Press the Save soft key to accept the change or the Back soft key to cancel.Call park key is configurable via web user interface at the path DSSKey->Line Key.To use call park:1. User on phone A places a call to phone B.2. User on phone A wants to take the call in a conference room for privacy, thenCall park is not available on all servers. Contact your system administrator for moreinformation.