Yealink SIP-T42G User Manual

Also see for Yealink SIP-T42G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T42G User Manual Manual pdf 109 page image

Advanced Phone Features99In the following figure, the LCD screen shows an incoming call from 1001 on themonitored line.NoteWhen there is an active call on the IP phone, you can transfer the active call to themonitored phone number directly by pressing the BLF key. The phone transfers theactive call differently depending on the transfer mode on DSS key. For more informationon the transfer mode on DSS key, refer to transfer in DSS Keys section on page 47.You can record calls by pressing a record key on the phone. The SIP-T42G IP phonesupports record and URL record.Two ways of call recording: Record: The phone sends a SIP INFO message containing a specific header “Record:on/off” to trigger a recording. URL Record: The phone sends an HTTP URL request to trigger a recording. Contactyour system administrator for the predefined URL.NoteTo configure a record key via phone user interface:1. Press Menu->Features->DSS Keys.2. Select the desired DSS key.3. Press or , or the Switch soft key to select Key Event from the Type field.4. Press or , or the Switch soft key to select Record from the Key Type field.5. (Optional.) Enter a string that will appear on the LCD screen in the Label field.6. Press the Save soft key to accept the change or the Back soft key to cancel.Call record is not available on all servers. Contact your system administrator for moreinformation.If your phone is locked and the type of the keypad lock is configured as Function Keys orAll keys, you cannot use the Dpickup, Dial, New Call and Cancel soft keys until unlocked.