Yealink SIP-T42G User Manual
Also see for Yealink SIP-T42G: Developer's guideAdministrator's guideManualAuto provisioning guideGetting started
                                                                                                                                              | |
Contents
| 
Advanced Phone Features111You can leave voice mails for someone else on the SIP-T42G IP phone. You can also listento the voice mails stored in a centralized location. When receiving a new voice mail, thephone will play a warning tone, and the power indicator LED will slow flash red. TheLCD screen will display a prompt message and appear an icon.NoteTo leave a voice mail:You can leave a voice mail for someone else when he/she is busy or inconvenient toanswer the call. Follow the voice prompt from the system server to leave a voice mail,and then hang up.To configure voice mail access codes via phone user interface:1. Press Menu->Messages->Voice Mail->Set Voice Mail.2. Press the navigation keys to highlight the account which you want to set.3. Press the 123 soft key to select the proper input mode and then enter the voice mailaccess code (e.g., *88).4. Press the Save soft key to accept the change or the Back soft key to cancel.NoteTo listen to voice mails:1. When the phone user interface prompts receiving new voice mails and the powerindicator LED slow flashes red, press or the Connect soft key to dial out thevoice mail access code.Voice mail is not available on all servers. Contact your system administrator for moreinformation.Voice mail access code must be predefined on the system server. Contact your systemadministrator for the more information. |
Related manuals for Yealink Yealink SIP-T42G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine