Getting Started15The phone status is displayed on the first page of the web user interface.If your phone cannot contact a DHCP server for any reason, you need to configurenetwork settings manually. The IP phone can support either or both IPv4 and IPv6addresses.To configure the IP address mode via phone user interface:1. Press Menu->Settings->Advanced Settings (password: admin) ->Network->WANPort.2. Press or , or the Switch soft key to select IPv4, IPv6 or IPv4 & IPv6 from the IPMode field.3. Press the Save soft key to accept the change or the Back soft key to cancel.To configure a static IPv4 address via phone user interface:1. Press Menu->Settings->Advanced Settings (password: admin) ->Network->WANPort.2. Press to select IPv4 and press the Enter soft key.3. Press to select Static IPv4 Client and press the Enter soft key.
