User Guide for SIP VP-T49G IP phone192desired contact to dial out.- Tap Directory, and then tap Remote Phone Book. Search for the contact and tapthe desired contact to dial out. (Remote phone book should be configured inadvance, refer to Remote Phone Book on page 94 for more information.)- Tap History, and then tap the desired list. Tap the desired entry to dial out.3. After the party answers the call, press or tap the Transfer soft key to completethe transfer.If you are using a handset, the transfer can be completed by hanging up the handset.You can enable or disable call waiting on the phone. If call waiting is enabled, you canreceive another call when there is already an active call on the phone. Otherwise,another incoming call is automatically rejected by the phone with a busy messagewhen there is an active call on the phone. You can also enable or disable the phone toplay a warning tone when receiving another call.To configure call waiting via phone user interface:1. Tap ->Features->Call Waiting.2. Tap the On radio box of the Call Waiting field.3. Tap the On radio box of the Play Tone field.4. (Optional.) Enter the call waiting on code or off code respectively in the On Codeor Off Code field.5. Tap the Save soft key to accept the change or to cancel.Call waiting is configurable via web user interface at the path Features->GeneralInformation.
