Yealink SIP VP-T49G User Manual
Also see for SIP VP-T49G: Developer's guideGetting startedRecovery guideQuick start guideUser guide
                                                                                                                                                                                                                                                                                 | |
Contents
| 
User Guide for SIP VP-T49G IP phone28touchline and stick it down; connect one end of the USB3.0 cable to the camera.- Remove the other piece of the fastener’s liner and attach to the externalmonitor; attach the camera to the external monitor by pressing two sides ofDual Lock together. Make sure the camera is vertical and not askew otherwisethe near-site video image will be crooked. You are advised to attach thecamera to the external monitor whose back is straight.- Connect the other end of USB3.0 cable to the IP phone.- Connect one end of the HDMI cable to the HDMI port on the phone, andconnect the other end to the HDMI port on the external monitor.After you connect an external monitor to your phone, the icon will display on thestatus bar of the touch screen, and the touch screen will prompt ―Ext. Displayconnected‖.NoteYou have two options for network connection. You can select one of them according tothe current office environment. Connecting to the wired network Connecting to the wireless networkYou can connect your phone to a wired network.You can adjust the camera angle by rotating it up and down, and you have to press onthe back of camera to rotate it.If you want to insert the camera back to the IP phone and do not torn the 3M Dual Lock,please insert forcibly until the camera indicator LED illuminates solid green. And theembossing on the camera does not need to insert into the groove on the IP phone. |
Related manuals for Yealink SIP VP-T49G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine