Yealink VC Series Administrator's Manual

Also see for VC Series: Quick start guide

Contents

Configuring System Settings91To configure the time and date format via the remote control:1. Select Menu->Basic->Date & Time.2. Configure the desired values.according to the need.3. Press the Save soft key to accept the change.The time and date displayed on the LCD screen of the display device and VCP40phone will change accordingly.The system will enter the sleep mode automatically when it has been inactive for aperiod of time (the default time is 10 minutes). When the system is in sleep mode, it canstill accept incoming calls. The display device will prompt‖ No Signal‖, and the LCDscreen of the VCP40 phone prompts ―Sleeping Press any key to resume‖. You can pressany key on the remote control or the VCP40 phone to wake the system up. Whenreceiving a call, the system will be woken up automatically.You can change the automatic sleep time via the remote control or web user interface.You can also press the sleep key on the remote control to make the system sleepimmediately.The automaticsleep time is described below:Parameter Description Configuration MethodAutomatic SleepTimeConfigures the inactive time (inminutes) before the system entersleep mode.Default: 10 MinNote: During setup wizard, theautomatic sleep time feature isdisabled automatically. Toprotect the display device, youshould configure the automaticsleep time immediately.Remote ControlWeb User InterfaceTo configure the automatic sleep time via the web user interface:1. Click on Setting->General.