Yealink VC Series Administrator's Manual

Also see for VC Series: Quick start guide

Contents

Administrator‘s Guide for Yealink Video Conferencing Systems156user interface or using the Ethernet software. By analyzing the packets captured fortroubleshooting purpose.To capture packets via the web user interface:1. Click on Setting->Configuration.2. Click Start to start capturing signal traffic.3. Reproduce the issue to get stack traces.4. Click Stop to stop capturing.5. Click Export to open the file download window, and then save the file to your localsystem.To capture packets using the Ethernet software:Connect the Internet ports of the system and the PC to the same HUB, and then useSniffer, Ethereal or Wireshark software to capture the signal traffic. You can also setmirror port on a switch to monitor the port connected to the system.In some instances, status indicators are helpful for finding system troubles. Statusindicators may consist of the power LED, icons on the status bar of the display device orprompt messages.The following shows two examples of obtaining the system information from statusindicators: If a LINK failure of the system is detected, the icon will appear on the the statusbar of the display device, indicating the current network is not available. If the power LED does not light, it indicates the system is not powered on.For more information about the icons, refer to Icon Instructions on page 12.