Yealink VC400 Administrator's Manual

Also see for VC120: Getting started Recovery guide Quick guide Administrator's guide User guide

Configuring Security Features229Parameter Description Configuration MethodNew PasswordConfigures a new administratorpassword.Note: You can leave the passwordblank.Remote ControlWeb User InterfaceConfirm PasswordEnters the new configuredadministrator password.Note: The entered password mustbe the same as the one configuredby the parameter “New Password”.Remote ControlWeb User InterfaceTo configure administrator password via web user interface:1. Click on Security->Security.2. Select Administrator from the pull-down list of User Type.3. Enter the old administrator password in the Old Password field.4. Enter a new password in the New Password field.5. Enter the new password or leave it blank in the User Password field.6. Click Confirm to accept the change.To configure administrator password via the remote control:1. Select Menu->Advanced (default password: 0000) ->Password Reset.2. Enter the old password in the Current Password field.3. Configure a new password in the New Password and Confirm Password fields.4. Press the Save soft key to accept the change.Web Server TypeWeb server type determines the access protocol of the system’s web user interface. The systemsupports both HTTP and HTTPS protocols for accessing the web user interface. HTTP is anapplication protocol that runs on top of the TCP/IP suite of protocols. HTTPS is a web protocolthat encrypts and decrypts user page requests as well as the pages returned by the web server.Both the HTTP and HTTPS port numbers are configurable.Web server type parameters on the system are described below: