Yealink VC400 Administrator's Manual

Also see for VC120: Getting started Recovery guide Quick guide Administrator's guide User guide

Administrator’s Guide for Yealink Video Conferencing Systems230Parameter Description Configuration MethodHTTPEnables or disables the user toaccess the web user interface of thesystem using the HTTP protocol.Default: EnabledNote: If you change this parameter,the system will reboot to make thechange take effect.Remote ControlWeb User InterfaceHTTP PortSpecifies the HTTP port for the userto access the web user interface ofthe system.Valid Values: 1-65535Default: 80Note: Ensure that the configuredport is not used. If you change thisparameter, the system will reboot tomake the change take effect.Web User InterfaceHTTPSEnables or disables the user toaccess the web user interface of thesystem using the HTTPS protocol.Default: EnabledNote: If you change this parameter,the system will reboot to make thechange take effect.Remote ControlWeb User InterfaceHTTPS PortSpecifies the HTTPS port for the userto access the web user interface ofthe system.Valid Values: 1-65535Default: 443Note: Ensure that the configuredport is not used. If you change thisparameter, the system will reboot tomake the change take effect.Web User InterfaceTo configure web server type via web user interface:1. Click on Network->Advanced.2. Select the desired value from the pull-down list of HTTP.3. Enter the desired HTTP port in the HTTP Port field.4. Select the desired value from the pull-down list of HTTPS.