Yealink VC400 Administrator's Manual

Also see for VC120: Getting started Recovery guide Quick guide Administrator's guide User guide

Administrator’s Guide for Yealink Video Conferencing Systems40 Primary DNS (Domain Name Server) Secondary DNSYou need to configure the network settings of the system manually if any of them are notprovided by the DHCP server. For more information on configuring network settings manually,refer to Configuring Network Settings Manually on page 52.System StartupAfter the initializing process, the system will complete startup by cycling the following steps:1. The LED indicator on the VC400/VC120 codec illuminates solid green.2. The LED indicator on the camera illuminates solid green.3. The display device displays the boot up screen.4. The camera pans to the middle position automatically.5. The display device displays the setup wizard (when you first start up or reset the system,the display device will display the setup wizard)For more information on how to complete the setup wizard, refer to Setup Wizard on page40.6. After completing the setup wizard, the display device displays the main screen.The main screen displays the following: Time and date System IP address and site name Status icon Soft key labels Video image7. The video conferencing phone starts up normally. The phone’s LCD screen displays the sitename, status icon, soft keys, time and date.If the system has successfully passed through these steps, it starts up correctly and is ready foruse.Setup WizardWhen you first start up or reset the system, the display device will display the setup wizard.To complete the setup wizard via the remote control:1. Set the language displayed on the display device.