Feature Set Reference025-9368H 139Log Errors in Call Detail RecordsWhen the Call Detail Option (950-9587) has been installed, the Model 748 will log or record SMDR(Station Message Detail Record) information on interconnect calls. This record includes time/date ofcall, duration, user number and ANI against whom the call is billed, telephone number dialed andcall completion status. The Model 748 will also log errors such as invalid user number overdialed ortoll restriction invoked on telephone number dialed.The Call Detail Option has the ability to store internally up to 4000 SMDR records for laterdownload or retrieval. Once the storage capacity has been reached, additional records are no longerstored internally. To help maximize the value of data that is stored internally, the Model 748 allowsyou to control or filter out which records are stored. All calls are always logged out the local RS-232port in real time.Log errors in Call detail records lets you turn on or off the storage of errors such as invalid usernumber overdialed or toll restriction invoked. All calls are always logged out the local RS-232 serialport.How to program it:Access the Model 748 through your direct connected PC or terminal, or remotely from your PCconnected to a modem via the Model 748's internal modem.Once connected to the Model 748 and the Main Menu is on the screen, type “4” and press ENTER,the Accounting Menu will be displayed. Select the item number for Log errors in Call detail recordsand press ENTER.The currently selected mode or state will be shown along with a message instructing you to press thespace bar to change the mode or state, and to press ENTER to accept the current mode or state. Eachtime the space bar is pressed, the mode or state changes. Once the mode or state you desire isdisplayed, press ENTER to accept it. Note that if you accidentally pass the mode or state you want,keep pressing the space bar and the Model 748 will wrap around (when the last choice is displayed,it will return to the first one).The default setting is that “log errors” is disabled.See also “Call Detail Logging” earlier in this section.
