Feature Set Reference146 025-9368HMobile-to-MobileMobile-to-mobile is the ability to call another mobile through the interconnect using selectivecalling. This is one of the mobile originate privileges supported in the Model 748. When a user(radio) signs on, he will hear the Overdial prompt tone or Voice prompt #5 from the Model 748. Atthis point the call proceeds just like a phone-to-mobile call, the mobile must overdial a User numberor ANI indicating who the called party is.The Model 748 will selectively call and ring out on the channel. When the proper mobile answer isreceived, the Model 748 allows repeat operation while performing any required cross encoding ofsub-audible. The Call limit timer and Mobile activity timer are active and can terminate the call.Either user may terminate the call with his Disconnect ANI code.If the originating mobile has more than one privilege enabled, a steering digit will be required. Aftersending his Access ANI the Model 748 will key up and send the Steering digit prompt tone. Themobile then sends a “7”, the steering digit for mobile to mobile calls.See “Mobile-to-Mobile” in Section 3 for a detailed description of mobile-to-mobile operation.How to program it:Access the Model 748 through your direct connected PC or terminal, or remotely from your PCconnected to a modem via the Model 748's internal modem.Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press ENTER,and the Interconnect Menu will appear. Type “3” and press ENTER, the User Menu will bedisplayed using the currently selected user's data. Select the User number you wish to program (see“User Range” later in this section). Select the item number for Mobile-to-mobile and press ENTER.The currently selected mode or state will be shown along with a message instructing you to press thespace bar to change the mode or state, and to press ENTER to accept the current mode or state. Eachtime the space bar is pressed, the mode or state changes. Once the mode or state you desire isdisplayed, press ENTER to accept it. Note that if you accidentally pass the mode or state you want,keep pressing the space bar and the Model 748 will wrap around (when the last choice is displayed,it will return to the first one).The default for all users is “Disabled” for Mobile-to-mobile privileges.Mobile-to-mobile is supported by block or range programming. See “User Range” later in thissection for details.Application note:If no steering digit is desired, all other privileges (Mobile-to-phone and ANI mobile-repeat) must bedisabled. This makes Mobile-to-mobile the only calls that can be made.
