Feature Set Reference182 025-9368HWild ANIThe Roamer version of the Model 748 supports Wild ANI. This feature allows users (radios) fromdifferent areas to move or roam around between compatible systems and still have access to mobileoriginated interconnect privileges.This command enables or disables Wild ANI in the Model 748. When enabled, the “A” character inan ANI becomes a wild card marker. Any digit will match the wild character when Wild ANI is“Enabled”.See “How to Program ANIs in the Model 748” and “System Examples” in Section 4 for a discussionand examples of Wild ANI systems.How to program it:Access the Model 748 through your direct connected PC or terminal, or remotely from your PCconnected to a modem via the Model 748's internal modem.Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press ENTER,the Interconnect Menu will be displayed. Type “1” and press ENTER, the Mobile System menu willbe displayed. Select the item number for Wild ANI press ENTER.The currently selected mode or state will be shown along with a message instructing you to press thespace bar to change the mode or state, and to press ENTER to accept the current mode or state. Eachtime the space bar is pressed, the mode or state changes. Once the mode or state you desire isdisplayed, press ENTER to accept it. Note that if you accidentally pass the mode or state you want,keep pressing the space bar and the Model 748 will wrap around (when the last choice is displayed,it will return to the first one).How to program it using DTMF:Using DTMF either over the air, on the telephone line, or through the local telephone port, enter theprogram mode using the program access code (default is 12748).Enter: 126# (beep beep)Enter: [0 = disable, 1 = enable] # (beep beep beep beep beep)Exit programming mode:Enter: 99# (beep beep beep beep beep)The default setting for Wild ANI is “Disabled”.
