Programming025-9368H 61dispatch only (repeater operation) and one user (radio) for both interconnect and dispatch operationusing multi-digit ANI.Before starting these examples, go to the Diagnostic menu and reset the System database (item 2)and User databases (item 3) to factory default.Items that have been changed are in bold in the example menus.Interconnect OnlyOur interconnect only user has three items changed from default: Enabled is set to “Yes”,CTCSS/DCS decode and CTCSS/DCS encode are both set to “100.0 Hz”. Notice also that this is User1; Short sign-on users should be placed in the low end of the database.INTERCONNECT USER MENU1 - User range: 1 16 - Call limit time: 03 mins2 - Enabled: Yes 17 - Call detail logging: All3 - Access ANI: * 18 - Toll restrictions: Blap4 - Answer type: * 19 - Interconnect privacy: Repeat5 - Disconnect ANI: # 20 - Scheduled telco access: Disabled6 - Equipment type: Mobile 21 - Courtesy tone: Disabled7 - Mobile-to-phone: Enabled 22 - Mobile ringout: High warble8 - Phone-to-mobile: Enabled 23 - Page forward user: None9 - Mobile-to-mobile: Disabled 24 - Autodial mode: 0010 - ANI Mobile-repeat: Disabled 25 - Hookflash mode: Disabled11 - Selcall format: None 26 - Mobile activity timer: Enabled12 - Selcall capcode: 27 - Interconnect hog mode: Disabled13 - CTCSS/DCS decode: 100.0 28 - List users (in user range)14 - CTCSS/DCS encode: 100.0 29 - Airtime - Accumulate: 00:00:0015 - CTCSS/DCS drop: No to exitSelect a command:This user is now set up for Short sign-on; Mobile-to-Phone. Program a DTMF equipped radio for theproper transmit and receive frequencies that correspond to the repeater that the Model 748 isinstalled on. Set the CTCSS encode and decode for 100.0 Hz.Key up and send a DTMF “*” for greater than 500 msec. Unkey. Model 748 will key the transmitterand the seize the phone line. You should hear dial tone from the Central Office. Dial a localtelephone number. You should now be in conversation mode. Key up an send a DTMF “#” forgreater than 500 msec. Model 748 will send five short disconnect beeps and drop the transmitter.Call into the Model 748, when the line is answered the Overdial prompt tone will be issued (defaultis an 925 Hz beep tone); overdial 01 (001 for Roamer), the Model 748 will key the transmitter andstart sending ringing tones and encoding 100.0 Hz. Key up and send a DTMF “*” for greater than500 msec to answer. You should now be in conversation mode. Key up and send a DTMF “#” forgreater than 500 msec. The Model 748 will send five short disconnect beeps and drop thetransmitter.
