Zanussi ZCGHL50 User Manual

Zanussi ZCGHL50 User Manual Manual pdf 32 page image

32Levelling the applianceAdjustment to suit floor conditions or heightis obtained by rotating clockwise or anticlockwise the feet at the front and rear of theappliance. A spirit level should be placed onone of the shelves to confirm the applianceis correctly levelled.Grill assemblyThe two splashback screws marked A (seeFig.2a) should be screwed into the back ofthe appliance about halfway in. Engage thekeyhole slots in the splashback behind thetwo screws taking care not to trap the H.T.wire (see Fig.2b).Insert the four splashback screws marked B(see Fig. 2b).Tighten 6 off splashback screws (see Fig.2b).Connect the grill supply union at the back ofthe appliance and pull the H.T lead throughthe opening in the splashback. Feed leadthrough the hole in the top right hand side ofthe splashback and connect on to the grillelectrode. (see Fig. 2b).Fig.2bFig.2a