Zanussi ZCM 6605 Instruction Booklet

Contents

Zanussi ZCM 6605 Instruction Booklet Manual pdf 18 page image

18Something not workingSYMPTOM There is no spark when lighting the gas. The gas ring burns unevenly. The oven does not come on. The oven light does not come on. It takes too long to finish the dishes, or they arecooked too fast. Steam and condensation settle on the food and theoven cavity. The oven fan is noisy.SOLUTION Check that the unit is plugged in and the electricalsupply is switched on Check the mains fuse has not blown Check the burner cap and crown have beenreplaced correctly, e.g. after cleaning. Check the main jet is not blocked and the burnercrown is clear of food particles. Check the burner cap and crown have beenreplaced correctly, e.g. after cleaning. Check that a cooking function has been selected. Check that the oven door is completely closed. Check that he minute minder control knob is in theposition. Check that the socket switch or the switch from themains supply to the appliance are ON. Select a function with the oven function controlknob. Check the light bulb, and replace it if necessary(see "Oven lamp replacement"). The temperature may need adjusting. Refer to the contents of this booklet, especially tothe chapter “Using the Oven”. Leave dishes inside the oven no longer than 15-20minutes after the cooking is completed. Check that shelves and bakeware are not vibratingin contact with the oven back panel.If after all these checks, the appliance still does not work, contact your local Service Force Centre.If the appliance is not working correctly, please carry out the following checks, before contacting your local ServiceCentre.IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation,a charge will be made even if the appliance is under guarantee.