Zanussi ZOP37902 User Manual

Also see for ZOP37902: User manual User manual User manual User manual

Contents

Zanussi ZOP37902 User Manual Manual pdf 17 page image

3 Close the oven doorto the first opening posi-tion (halfway). Then pullforward and remove thedoor from its seat.4 Put the door on a softcloth on a stable surface.5 Release the lockingsystem to remove theglass panels.90°6 Turn the two fastenersby 90° and remove themfrom their seats.217 Carefully lift (step 1)and remove (step 2) theglass panels one by one.Start from the top panel.Clean the glass panels with water and soap. Dry the glasspanels carefully.Installing the door and the glass panelsWhen the cleaning is completed, install the glass panelsand the oven door. Do the above steps in the opposite se-quence.The middle panel has a decorative frame. The screen-printing zone must face the inner side of the door. Makesure that after the installation the surface of the glass pan-el frame on the screen-printing zones is not rough whenyou touch it.Make sure that you install the top panel in the seats cor-rectly. Refer to the illustration.What to do if…Warning! Refer to "Safety information" chapter.Problem Possible cause SolutionThe oven does not heat up. The appliance is deactivated. Activate the appliance.17www.zanussi.com