Problem Possible cause SolutionThe display shows an error code thatis not on this list.There is an electronic fault. 1. Deactivate the appliance withthe house fuse or the safetyswitch in the fuse box and acti-vate it again.2. If the display shows the errorcode again, contact the servicecentre.Steam and condensation collect onthe food and in the oven.You left the dish in the oven for toolong.Do not keep the dishes in the ovenfor longer than 15-20 minutes afterthe cooking ends.If you cannot find a solution to the problem yourself, con-tact your dealer or the service centre.The necessary data for the service centre is on the ratingplate. The rating plate is on the front frame of the ovencavity.We recommend that you write the data here:Model (MOD.) .........................................Product number (PNC) .........................................Serial number (S.N.) .........................................InstallationWarning! Refer to "Safety information" chapter.Building In573594589558548 20min. 55020580min. 56019www.zanussi.com